Wednesday, September 14, 2011

Solutions for soundproofing. TermoZvukoIzol

TermoZvukoIzol (TZI) - highly efficient sound insulation of domestic production. Material designed to meet the growing demands for solving problems enerogosberezheniya, ecology, comfort, and successfully used in the construction and operation of buildings over 10 years. TZI is available as a 3-ply mats and sewed termozvukoizolyatsionnyh tapes. This is material that has a health certificate, certificate of Ministry of Construction of Russia, the test of fire-technical characteristics, the results of formal studies of thermal and acoustic properties, reviews the competent organizations. TZI sewed mats are made of fiberglass piercing the canvas. Bilateral containment of non-woven polypropylene material protects against the penetration of glass fibers and dust into the environment. Key Features: Thickness - 14 mm; volumetric weight - 136 lb / ft ?; thermal conductivity - 0.0388 W / m ° C thermal resistance - 0.129 m ? ° C / W; vapor permeability coefficient - 0.50 ml / m.ch. Pa; sound absorption coefficient in the range of 500-8000 Hz - 0,22-0,87 (87%) and the average vibration isolation capability in the range (60-4000) Hz - 22 dB (reducing the impact and vibronoise 13 times). Mats TermoZvukoIzol issued in the form of paintings width of 1,5 m length of 10 m TermoZvukoIzol used in residential, civil and industrial construction in buildings of all degrees of fire resistance, as well as heat and sound insulation of industrial equipment, pipelines and ventkorobov with insulated surface temperatures from -100 ° C to +140 ° C. In the regeneration of building structures TermoZvukoIzol acts as an efficient sound-absorbing material, heat and vibration, an additional vapor barrier rooms. The material can also be used as a screen, restraining the wind load. Perfect soundproofing rooms provided with proper constructive use. Recommendations on installation of sound insulation TermoZvukoIzol To isolate the apartment, suburban home, the office of air and noise impact interior partitions Basalt Floor slab 5 mm thick cardboard TermoZvukoIzol 14 mm thick waterproofing material metal rails 27 x 60, mounted at a distance of 0,6 m from each other ( recommended distance - 0,4 m) Metal rails 27 x 29 or 50 x 50 (if necessary, additional insulation are filled with sound-absorbing mats basalt) Sheetrock subfloor Plinth for recording studios, video clubs, clubs, cafes, restaurants, entertainment facilities interior partitions Floor slab Basalt stitched mat 50 mm thick TermoZvukoIzol 14 mm thick metal rails 27 x 60, mounted at a distance of 0,6 m from each other (the recommended distance - 0,4 m) metal rails 27 x 29 Drywall - 2 layers of lining from basalt cardboard (the first fiber - drywall, second layer - gypsum sheet (GVLV)) subfloor Skirting For typical brick, monolithic and prefabricated high-rise buildings as well) soundproof wall wall thickness over 120 mm 1. Wood block, 30 x 30 mm is attached to the top of the wall along the entire length (providing an air gap from the insulated surface) 2. TermoZvukoIzol fastened with screws to the blocks with an overlap on the ceiling and floor of 80-90 mm. The material should cover the entire surface of the wall. Overlap at the junction sheet - 50 mm, two-sided adhesive tape glued. Note: It is important not to disturb the installation soundproof layer 3. Horizontal metal profile is fixed on top of TermoZvukoIzola to the ceiling and floor through the strip of cardboard basalt at fixing screws. To attach the vertical profile of the guides with the size of a sheet drywall 4. Drywall is attached in such a way as to prevent direct contact sheets of drywall from the floor and ceiling, which provides admission TZI. To enhance the design can use two layers of plasterboard 5. Note: The calculation of the TZI to produce the light overlap and overlap (+ 10%) b) soundproof wall wall thickness up to 120 mm 1. Basalt board 10 mm thick (used as an additional layer of soundproofing construction). Fastened to the wall with liquid nails (spot application), sheets of cardboard should not have gaps (overlapping 2 cm) 2. TermoZvukoIzol fastened with screws to the blocks with an overlap on the ceiling and floor of 80-90 mm. The material should cover the entire surface of the wall. Overlap at the junction sheet - 50 mm, two-sided adhesive tape glued. Note: It is important not to disturb the installation soundproof layer. To enhance the effect recommended 2 layer 3. Horizontal metal profile is fixed on top of TermoZvukoIzola to the ceiling and floor through the strip of cardboard basalt at fixing screws. To attach the vertical profile of the guides with the size of a sheet drywall 4. Drywall is attached in such a way as to prevent direct contact sheets of drywall from the floor and ceiling, which provides admission TZI. To enhance the design can use two layers of plasterboard 5. Note: The calculation of the TZI to produce the light overlap and overlap (+ 10%) for soundproofing the floor with a base in the form of a monolithic floating screed Note: Gender in the soundproof layer should not have hard links (sound bridges) with the carrier part of the ceiling, walls and other structures building, ie should be "floating". 1. Basalt board 10 mm thick plank on the concrete floor. Sheets are overlapped 2. TermoZvukoIzol spreads on basalt cardboard. Material closes the entire floor area, with stops at the wall in the finished floor level. If the width of the material is not enough, is an overlap of at least 5 cm 3. Screed (40-50 mm) with wire mesh reinforcement or as a reinforcing layer. Ribbons Ribbons TZI TermoZvukoIzol used as fixed by winding on the surface of the material for insulation and soundproofing of active tanks, pipelines (sewer, water, ventilation, etc.) in the temperature range from -50 ° C to +140 ° C. Tapes are made of fiberglass piercing PSHT (raspushennye fiberglass) and the shell of a nonwoven fabric (100% polypropylene), have excellent vibration, thermal and acoustic properties and high strength. Key Features: Dimensions: Width (m) x length (m) x thickness (mm) - 0.13 x 5 x 14, thermal conductivity coefficient - 0.0388 W / m ° C operating temperature range - from -50 ° to + 140 ° C, the normal sound absorption coefficient in the range of frequencies from 500 Hz to 6000 Hz - 17 to 82%. TZI tape does not absorb moisture, prevents rust and can be used for insulation of pipes of any complexity, the configuration and dimensions. Term operation and storage of tapes is not limited. Possible to reuse the tape. Tape TZI possess such important properties as flexibility, good thermal properties, environmental and others, which allows the use of materials for the insulation of networks with a large number of thermal devices, sensors on the networks of curves and proximity to the sites and in areas requiring the aesthetics of the insulating materials . Recommendations on installation tape TermoZvukoIzol pipe wrapped tape, which is attached with adhesive strips located every meter. If necessary, repair the pipe tape can be removed, and then reinsert. TZI appreciated by specialists in the field of public utilities. Demand for insulation materials of TZI, including tape TermoZvukoIzol is constantly growing.

No comments:

Post a Comment